6.2 Option Summary

--options file

Reads configuration from file instead of from the default per-user configuration file. The default configuration file is named scdaemon.conf and expected in the .gnupg directory directly below the home directory of the user.

--homedir dir

Set the name of the home directory to dir. If this option is not used, the home directory defaults to ~/.gnupg. It is only recognized when given on the command line. It also overrides any home directory stated through the environment variable GNUPGHOME or (on Windows systems) by means of the Registry entry HKCU\Software\GNU\GnuPG:HomeDir.

On Windows systems it is possible to install GnuPG as a portable application. In this case only this command line option is considered, all other ways to set a home directory are ignored.

-v

--verbose

Outputs additional information while running. You can increase the verbosity by giving several verbose commands to gpgsm, such as ‘-vv’.

--debug-level level

Select the debug level for investigating problems. level may be a numeric value or a keyword:

none

No debugging at all. A value of less than 1 may be used instead of the keyword.

basic

Some basic debug messages. A value between 1 and 2 may be used instead of the keyword.

advanced

More verbose debug messages. A value between 3 and 5 may be used instead of the keyword.

expert

Even more detailed messages. A value between 6 and 8 may be used instead of the keyword.

guru

All of the debug messages you can get. A value greater than 8 may be used instead of the keyword. The creation of hash tracing files is only enabled if the keyword is used.

How these messages are mapped to the actual debugging flags is not specified and may change with newer releases of this program. They are however carefully selected to best aid in debugging.

Note: All debugging options are subject to change and thus should not be used by any application program. As the name says, they are only used as helpers to debug problems.

--debug flags

Set debug flags. All flags are or-ed and flags may be given in C syntax (e.g. 0x0042) or as a comma separated list of flag names. To get a list of all supported flags the single word "help" can be used. This option is only useful for debugging and the behavior may change at any time without notice.

--debug-all

Same as --debug=0xffffffff

--debug-wait n

When running in server mode, wait n seconds before entering the actual processing loop and print the pid. This gives time to attach a debugger.

--debug-ccid-driver

Enable debug output from the included CCID driver for smartcards. Using this option twice will also enable some tracing of the T=1 protocol. Note that this option may reveal sensitive data.

--debug-disable-ticker

This option disables all ticker functions like checking for card insertions.

--debug-allow-core-dump

For security reasons we won’t create a core dump when the process aborts. For debugging purposes it is sometimes better to allow core dump. This option enables it and also changes the working directory to /tmp when running in --server mode.

--debug-log-tid

This option appends a thread ID to the PID in the log output.

--debug-assuan-log-cats cats

Changes the active Libassuan logging categories to cats. The value for cats is an unsigned integer given in usual C-Syntax. A value of 0 switches to a default category. If this option is not used the categories are taken from the environment variable ASSUAN_DEBUG. Note that this option has only an effect if the Assuan debug flag has also been with the option --debug. For a list of categories see the Libassuan manual.

--no-detach

Don’t detach the process from the console. This is mainly useful for debugging.

--listen-backlog n

Set the size of the queue for pending connections. The default is 64. This option has an effect only if --multi-server is also used.

--log-file file

Append all logging output to file. This is very helpful in seeing what the agent actually does. Use socket:// to log to socket.

--pcsc-shared

Use shared mode to access the card via PC/SC. This is a somewhat dangerous option because Scdaemon assumes exclusive access to the card and for example caches certain information from the card. Use this option only if you know what you are doing.

--pcsc-driver library

Use library to access the smartcard reader. The current default on Unix is libpcsclite.so and on Windows winscard.dll. Instead of using this option you might also want to install a symbolic link to the default file name (e.g. from libpcsclite.so.1). A Unicode file name may not be used on Windows.

--disable-ccid

The integrated CCID driver for CCID compliant devices can be available when libusb was detected at build time, and it is used to access the smartcard reader. If access via PC/SC driver is needed, please configure this option to disable CCID driver support (if any). In GnuPG 2.2, there was a fallback mechanism from CCID driver to PC/SC driver. The fallback mechanism worked, because scdaemon in GnuPG 2.2 only supported a single token/reader. To support of multiple tokens/readers at the same time, fallback mechanism was removed.

--reader-port number_or_string

This option may be used to specify the port of the card terminal. A value of 0 refers to the first serial device; add 32768 to access USB devices. The default is 32768 (first USB device). PC/SC or CCID readers might need a string here; run the program in verbose mode to get a list of available readers. The default is then the first reader found.

To get a list of available CCID readers you may use this command:

echo scd getinfo reader_list \ | gpg-connect-agent --decode | awk '/^D/ {print $2}'

--card-timeout n

This option is deprecated. In GnuPG 2.0, it used to be used for DISCONNECT command to control timing issue. Since DISCONNECT command works synchronously, it has no effect.

--enable-pinpad-varlen

Please specify this option when the card reader supports variable length input for pinpad (default is no). For known readers (listed in ccid-driver.c and apdu.c), this option is not needed. Note that if your card reader doesn’t supports variable length input but you want to use it, you need to specify your pinpad request on your card.

--disable-pinpad

Even if a card reader features a pinpad, do not try to use it.

--deny-admin

This option disables the use of admin class commands for card applications where this is supported. Currently we support it for the OpenPGP card. This option is useful to inhibit accidental access to admin class command which could ultimately lock the card through wrong PIN numbers. Note that GnuPG versions older than 2.0.11 featured an --allow-admin option which was required to use such admin commands. This option has no more effect today because the default is now to allow admin commands.

--disable-application name

This option disables the use of the card application named name. This is mainly useful for debugging or if a application with lower priority should be used by default.

--application-priority namelist

This option allows one to change the order in which applications of a card a tried if no specific application was requested. namelist is a space or comma delimited list of application names. Unknown names are simply skipped. Applications not mentioned in the list are put in the former order at the end of the new priority list.

To get the list of current active applications, use

gpg-connect-agent 'scd getinfo app_list' /bye

All the long options may also be given in the configuration file after stripping off the two leading dashes.