Working with hash algorithms - The Libgcrypt Reference Manual

To use most of these function it is necessary to create a context; this is done using:

— Function: gcry_error_t gcry_md_open (gcry_md_hd_t *hd, int algo, unsigned int flags)

Create a message digest object for algorithm algo. flags may be given as an bitwise OR of constants described below. algo may be given as 0 if the algorithms to use are later set using gcry_md_enable. hd is guaranteed to either receive a valid handle or NULL.
For a list of supported algorithms, see See Available hash algorithms.
The flags allowed for mode are:

GCRY_MD_FLAG_SECURE
Allocate all buffers and the resulting digest in "secure memory". Use this is the hashed data is highly confidential.
GCRY_MD_FLAG_HMAC
Turn the algorithm into a HMAC message authentication algorithm. This only works if just one algorithm is enabled for the handle. Note that the function gcry_md_setkey must be used to set the MAC key. The size of the MAC is equal to the message digest of the underlying hash algorithm. If you want CBC message authentication codes based on a cipher, see See Working with cipher handles.

You may use the function gcry_md_is_enabled to later check whether an algorithm has been enabled.

If you want to calculate several hash algorithms at the same time, you have to use the following function right after the gcry_md_open:

— Function: gcry_error_t gcry_md_enable (gcry_md_hd_t h, int algo)

Add the message digest algorithm algo to the digest object described by handle h. Duplicated enabling of algorithms is detected and ignored.

If the flag GCRY_MD_FLAG_HMAC was used, the key for the MAC must be set using the function:

— Function: gcry_error_t gcry_md_setkey (gcry_md_hd_t h, const void *key, size_t keylen)

For use with the HMAC feature, set the MAC key to the value of key of length keylen bytes. There is no restriction on the length of the key.

After you are done with the hash calculation, you should release the resources by using:

— Function: void gcry_md_close (gcry_md_hd_t h)

Release all resources of hash context h. h should not be used after a call to this function. A NULL passed as h is ignored. The function also zeroises all sensitive information associated with this handle.

Often you have to do several hash operations using the same algorithm. To avoid the overhead of creating and releasing context, a reset function is provided:

— Function: void gcry_md_reset (gcry_md_hd_t h)

Reset the current context to its initial state. This is effectively identical to a close followed by an open and enabling all currently active algorithms.

Often it is necessary to start hashing some data and then continue to hash different data. To avoid hashing the same data several times (which might not even be possible if the data is received from a pipe), a snapshot of the current hash context can be taken and turned into a new context:

— Function: gcry_error_t gcry_md_copy (gcry_md_hd_t *handle_dst, gcry_md_hd_t handle_src)

Create a new digest object as an exact copy of the object described by handle handle_src and store it in handle_dst. The context is not reset and you can continue to hash data using this context and independently using the original context.

Now that we have prepared everything to calculate hashes, it is time to see how it is actually done. There are two ways for this, one to update the hash with a block of memory and one macro to update the hash by just one character. Both methods can be used on the same hash context.

— Function: void gcry_md_write (gcry_md_hd_t h, const void *buffer, size_t length)

Pass length bytes of the data in buffer to the digest object with handle h to update the digest values. This function should be used for large blocks of data.

— Function: void gcry_md_putc (gcry_md_hd_t h, int c)

Pass the byte in c to the digest object with handle h to update the digest value. This is an efficient function, implemented as a macro to buffer the data before an actual update.

The semantics of the hash functions do not provide for reading out intermediate message digests because the calculation must be finalized first. This finalization may for example include the number of bytes hashed in the message digest or some padding.

— Function: void gcry_md_final (gcry_md_hd_t h)

Finalize the message digest calculation. This is not really needed because gcry_md_read does this implicitly. After this has been done no further updates (by means of gcry_md_write or gcry_md_putc are allowed. Only the first call to this function has an effect. It is implemented as a macro.

— Function: unsigned char * gcry_md_read (gcry_md_hd_t h, int algo)

gcry_md_read returns the message digest after finalizing the calculation. This function may be used as often as required but it will always return the same value for one handle. The returned message digest is allocated within the message context and therefore valid until the handle is released or reseted (using gcry_md_close or gcry_md_reset. algo may be given as 0 to return the only enabled message digest or it may specify one of the enabled algorithms. The function does return NULL if the requested algorithm has not been enabled.

Because it is often necessary to get the message digest of one block of memory, a fast convenience function is available for this task:

— Function: void gcry_md_hash_buffer (int algo, void *digest, const void *buffer, size_t length);

gcry_md_hash_buffer is a shortcut function to calculate a message digest of a buffer. This function does not require a context and immediately returns the message digest of the length bytes at buffer. digest must be allocated by the caller, large enough to hold the message digest yielded by the the specified algorithm algo. This required size may be obtained by using the function gcry_md_get_algo_dlen.
Note that this function will abort the process if an unavailable algorithm is used.

Hash algorithms are identified by internal algorithm numbers (see gcry_md_open for a list). However, in most applications they are used by names, so two functions are available to map between string representations and hash algorithm identifiers.

— Function: const char * gcry_md_algo_name (int algo)

Map the digest algorithm id algo to a string representation of the algorithm name. For unknown algorithms this function returns the string "?". This function should not be used to test for the availability of an algorithm.

— Function: int gcry_md_map_name (const char *name)

Map the algorithm with name to a digest algorithm identifier. Returns 0 if the algorithm name is not known. Names representing ASN.1 object identifiers are recognized if the IETF dotted format is used and the OID is prefixed with either "oid." or "OID.". For a list of supported OIDs, see the source code at cipher/md.c. This function should not be used to test for the availability of an algorithm.

— Function: gcry_error_t gcry_md_get_asnoid (int algo, void *buffer, size_t *length)

Return an DER encoded ASN.1 OID for the algorithm algo in the user allocated buffer. length must point to variable with the available size of buffer and receives after return the actual size of the returned OID. The returned error code may be GPG_ERR_TOO_SHORT if the provided buffer is to short to receive the OID; it is possible to call the function with NULL for buffer to have it only return the required size. The function returns 0 on success.

To test whether an algorithm is actually available for use, the following macro should be used:

— Function: gcry_error_t gcry_md_test_algo (int algo)

The macro returns 0 if the algorithm algo is available for use.

If the length of a message digest is not known, it can be retrieved using the following function:

— Function: unsigned int gcry_md_get_algo_dlen (int algo)

Retrieve the length in bytes of the digest yielded by algorithm algo. This is often used prior to gcry_md_read to allocate sufficient memory for the digest.

In some situations it might be hard to remember the algorithm used for the ongoing hashing. The following function might be used to get that information:

— Function: int gcry_md_get_algo (gcry_md_hd_t h)

Retrieve the algorithm used with the handle h. Note that this does not work reliable if more than one algorithm is enabled in h.

— Function: int gcry_md_is_secure (gcry_md_hd_t h)

This function returns true when the digest object h is allocated in "secure memory"; i.e. h was created with the GCRY_MD_FLAG_SECURE.

— Function: int gcry_md_is_enabled (gcry_md_hd_t h, int algo)

This function returns true when the algorithm algo has been enabled for the digest object h.

Tracking bugs related to hashing is often a cumbersome task which requires to add a lot of printf statements into the code. Libgcrypt provides an easy way to avoid this. The actual data hashed can be written to files on request.

— Function: void gcry_md_debug (gcry_md_hd_t h, const char *suffix)

Enable debugging for the digest object with handle h. This creates create files named dbgmd-<n>.<string> while doing the actual hashing. suffix is the string part in the filename. The number is a counter incremented for each new hashing. The data in the file is the raw data as passed to gcry_md_write or gcry_md_putc. If NULL is used for suffix, the debugging is stopped and the file closed. This is only rarely required because gcry_md_close implicitly stops debugging.

The following two deprecated macros are used for debugging by old code. They shopuld be replaced by gcry_md_debug.

— Function: void gcry_md_start_debug (gcry_md_hd_t h, const char *suffix)

Enable debugging for the digest object with handle h. This creates create files named dbgmd-<n>.<string> while doing the actual hashing. suffix is the string part in the filename. The number is a counter incremented for each new hashing. The data in the file is the raw data as passed to gcry_md_write or gcry_md_putc.

— Function: void gcry_md_stop_debug (gcry_md_hd_t h, int reserved)

Stop debugging on handle h. reserved should be specified as 0. This function is usually not required because gcry_md_close does implicitly stop debugging.

7.3 Working with hash algorithms